CTR-Remote, CTR-PC, and CTR-Rcvr were developed using protocol documents from Yaesu, Kenwood, Icom, Elecraft and various web sources. These programs have been tested on the radios shown below.

As a general rule, most Kenwood and Icom HF radios use the same protocols so even if your radio isn't shown below, it may still work. Yaesu reinvents the wheel with every radio so if your radio isn't in the Yaesu list, chances are it won't work. Let us know what you have and we'll try to add it.

As the list of users grows so will the list of supported radios. Here's where we are now...

Yaesu

    FT-100D
    FT-757GXII (not the GX model)
    FT-817
    FT-847
    FT-857GX
    FT-890
    FT-897
    FT-900
    FT-1000 Mark V

Kenwood   

    TS-450
    TS-570D
    TS-680 (and 140)
    TS-690
    TS-711
    TS-811
    TS-850
    TS-940
    TS-950
    TS-2000

NOTE: All Kenwood HF radios are supported. The list above is the radios we have ID #'s for. If you connect to your radio and get an ID code instead of a model (i.e. the name displayed in the Control tab is CTR: KW [id#] instead of the model #), please send us the model # and the [id#] and we'll add it to the program.

Icom

CTR-Rcvr and CTR-PCRcvr are compatible with the Icom PCR100 and PCR1000. The PCR1500 and PCR2500 radios are not supported at this time.

CTR-Remote and CTR-PC are compatible with most Icom radios using the CI-V interface, including

R10
R71
R72
R75
R7100
R7000
R8500
R9000
78
271
275
375
471
475
575
703
706
706MkII
706MkIIG
707
718
725
726
728
729
735
736
737
738
746
746Pro
751A
756
756Pro
756ProII
761
765
775
781
820
821
910
970
1271
1275
7000

Elecraft

    K2 and K2/100 - requires either the KPA100 kit or KIO2 RS232 interface kit